Metro Wide Roofing washes, restores and seals driveways across metro Melbourne. Whether the drive just needs a deep clean or has cracks and faded colour that need fixing before sealing, one crew handles the lot. We look at the surface, quote each stage in writing, and schedule around the weather. Call 0466 477 008 or book below.
Driveway pressure washing Melbourne
High-pressure cleaning with a surface cleaner lifts years of oil, tyre marks, grime and organic growth from concrete, exposed aggregate and pavers. Stubborn stains are pre-treated. The result is the driveway you had when it was laid, and the right base for sealing.
Driveway restoration Melbourne
Restoration is for driveways with real wear: cracks, spalling, faded or patchy colour, or a surface that has gone porous. Work can include crack filling, re-colouring and resurfacing, finished with a sealer so the repair lasts.
Driveway sealing Melbourne
A sealer locks in a clean or restored surface and stops oil and water soaking in. We use penetrating or film-forming acrylic sealers depending on the surface and the finish you want, matt or wet-look. Sealing is done on a dry driveway, usually a separate visit after washing.
Which driveway surfaces can be treated?
- Plain and coloured concrete
- Exposed aggregate
- Concrete and clay pavers
- Paths, patios and pool surrounds on the same visit
How long does sealing last in Melbourne’s climate?
Typically two to four years depending on traffic, sun exposure and the sealer used. A re-seal on a clean surface is quick and keeps the driveway protected.
Our driveway process
- Look and quote
A quick on-site look, then a written quote with wash, restoration and sealing itemised.
- Wash
Pre-treat stains, pressure clean, rinse. Gardens and drains protected.
- Restore
Cracks and surface damage repaired, colour renewed where needed.
- Seal and hand over
Sealer applied on a dry surface, cure time explained, photos sent.
Recent work
Frequently asked questions
Can you pressure wash and seal a driveway on the same day?
Washing and sealing need drying time between them, so most jobs are two visits. We explain the timing in the quote.
How long does driveway sealing last?
Typically two to four years in Melbourne conditions depending on traffic and surface.
Will pressure washing damage pavers or exposed aggregate?
Not when the pressure and nozzle are matched to the surface. We adjust on site and test a small area first.
Can you do the roof on the same visit?
Yes. Roof washing and driveway washing are often booked together, since the crew and equipment are already there.
